60A Solar lighting controller WS-AL2460

Brand:	WELLSEE	Size:	210*125*50mm
products name:	solar lighting controller	Weight:	1100g
Model:	WS-AL2460 60A	Package:	16pc/ctn

WS-AL2460 60A WELLSEE Solar controller, can intelligently senses the strength of the light outside. It can automatically open the lamp at dark, and turn to high-light automatically after giving the lamp low-light for half an hour. And then turn to morning light when set time is up or at day break. After that, the lamp can be closed automatically after half an hour (the time of high-light can be set.) The time of the high-light can be set as you request. Ten hours’ high-light can be set as full power plus half power light. For example, 4 hours full power light(full light of the bulb) and then 6 hours half power(half light of the bulb), after that morning light until day break, then the controller will turn off the load automatically. This controller can adjust the light accordingly to save the energy.

 

WS-AL2460 60A WELLSEE solar controller adopts PWM dimmer technology to adjust the light of LED lamps, can work with different kinds of constant-current source. This controller has the advanced characteristics of low cost, simple maintain, simple connection, easy maintenance, energy saving, reducing surge current and high power factor. Compared with the ordinary lamp controller, this AL controller can save more than 35% energy.

WS-AL2460 60A WELLSEE solar controller adopts PWM charging function, can active the battery, avoid the sulfide crystals and battery dehydration, so to extend battery life span.

Functions:

1. 12V/24V automatically detection
2. intelligently senses the light outside, turn on automatically when getting dark and turn off when day break
3. Micro-processing controller pulse-width modulation (PWM) charging
4. Light intensity can be set to save energy consumption, thereby achieving the energy saving effect
5. It can prevent reverse charging (the battery charges the solar panel).
6. Lightning protection, short circuit protection (with self-recovery)
7. It can prevent anti-charging function (solar panels to charge batteries)
8. It can prevent reverse connection of the battery and solar panel.
9. It can set 20 time grade or 10 minutes section modes
10. It has a LET indicator of the working condition of charging and discharging:

• One piece of Charge Indicator LED (mark: Charge). When it is bright, the battery is charged strongly; flickeringly means floating charge, no light means stop charging.
• One piece of Load Indicator LED (mark: Light). When it is bright, there is output and load can work; if LED goes out, means there isn’t output and the load cannot work.
• Battery indicator: red under =voltage   Green =full    Yellow =normal 

Technical parameter:

1. Model:WS-AL2460 60A
2. System voltage:12V / 24V Automatic distinguish voltage
3. Max charge current:60A
4. Charge off voltage(HVD):14.4V / 28.8V*
5. Low Voltage Directive(LVD):10.8V / 21.6V*
6. Low Voltage Restore(LVR):11.8V / 23.6V*
7. temperature compensation:-3mv/℃/cell
8. open circuit losses:≤30mA
9. Light operate:light control turn on + light control turn off
10. Light time control:Light control turn on/off + time control turn on/off
11. Time control classification:0.5 hours started,half an hour of one grade,up to 10 hours
12. ambient temperature:-25℃-----+55℃
13. quiescent dissipation:24mA
14. control mode:PWM
15. Max loop voltage drop:350 mV

Above-mentioned parameters With * can be determined according to clients’ special request.

We are special large scale R&D and manufactory enterprise of solar street lamp controller and global supplier of Wellsee solar controller and photovoltaic system equipment. We also have passed ISO9001, CE and RoHS certifications. Wuhan Wellsee products can be designed and produced according to clients’ special request. Welcome agents from every area!